Description
Big trucks and big jobs require serious snow plowing equipment. The FISHER® MC Series is the biggest, toughest plow we make. Built for municipal and contractor vehicles in the 17,000-27,500 GVW range, the MC Series is just right for narrow streets and intersections and large parking lots. Matching the plow to the job – that’s how to get it done!
Trip-Edge Design
Only the edge of the blade trips when an obstacle is encountered. It’s much less jarring than a full-trip blade, and because the plow blade stays upright, plowed snow remains in front of the blade. The FISHER® trip edge uses compression-type springs. They never need adjusting and don’t stretch like extension springs.
Big Moldboard
Available in 9’ and 10’ blade widths, the MC Series Snow Plow is a full 34” high and made from 11-gauge steel.
Heavy-Duty Features
- The 9’ blade features two wear-resistant cast-iron shoes and four compression-type trip springs.
- The 10’ blade has four cast-iron shoes, and six compression-type trip springs.
- Eight vertical ribs provide structural reinforcement.
- An 8” center-punched reversible cutting edge is standard on both sizes. The cutting edge increases wear resistance and improves cutting power and scraping ability.
Reliable Hydraulics
We build our own hydraulics for unmatched speed and durability. Fast hydraulics allow you to change the blade position quickly and easily for efficient plowing. All critical hydraulic components are fully enclosed for protection from the elements.
MC Series Snow Plow Specifications
Blade Width | Blade Height | Blade Gauge | Trip Springs | Ribs | Angling Rams | Plowing Width (Full Angle) | Approx. Weight | Wear Shoes | Cutting Edge |
9' | 34" | 11" | 4 | 8 | 2" x 16" | 7' 11" | 1174 lb | Standard | 1/2" x 8" |
10' | 34" | 11" | 6 | 8 | 2" x 16" | 8' 10" | 1308 lb | Standard | 1/2" x 8" |