XLS™ Expandable Length Snow Plow

Description

Change the way you plow snow, and take your business to the next level of profitability, with the FISHER® XLS™ Expandable Length Snow Plow. With the ability to expand from 8’ to 10’ wide, and then angle the wings to an 8’ 10”. scoop, or the ultimate windrowing configuration, you can be up to 30% more efficient.

Trip-Edge Design

Only the edge of the blade trips when an obstacle is encountered. It’s much less jarring than a full-trip blade, and because the plow blade stays upright, plowed snow remains in front of the blade. The FISHER® trip edge uses compression-type springs. They never need adjusting and don’t stretch like extension springs.

Rugged Moldboard

The 12-gauge steel moldboard is 29” high, and with independently controlled wings, the XLS™ extends from 8’ to 10’ wide. With both wings angled forward, you get the carrying capacity of a 8’ 10” scoop.

Durable polyurethane wing cutting edges reduce wear and protect the blade – allowing it to “trip” in any position.

The XLS snowplow features an aggressive 70-degree attack angle that provides a cleaner scrape and reduces the need for deicing after plowing.

Blade Configurations

Position your plow for maximum plowing efficiency at the touch of a button.

The 8’ retracted position is perfect for transport and for narrow access areas, such as drive-through lanes or tight windrowing areas.

The 10’ expanded-width position lets you take wider passes in larger, wide-open spaces.

For unmatched windrowing productivity, angle the leading wing forward with the trailing wing extended, and you can use the full blade without spillover. Unparalleled windrowing efficiency, with no spillover on passes, reduces cleanup time.

For the ultimate in snow-carrying capacity, angle both wings forward for an 8’ 10” scoop. The XLS™ can fully angle in the scoop position to effectively carry snow around corners, and maneuver in congested parking lots, something V-plows cannot do.

Scoop Mode

The width and carrying area of the XLS™ plow in scoop mode delivers significantly greater snow carrying capacity. Plus, the XLS can fully angle in the scoop position to maximize plow handling and capacity – ideal for carrying large quantities of snow and plowing around corners, in congested parking lots, and along street curbs and sidewalks.

Windrowing

The independently controlled wings on the XLS™ take windrowing to a whole new level. In a straight-blade position, plows must use less of a blade width with each pass to keep snow from flowing off the leading edge. With the XLS, you can expand and angle the leading wing forward, so snow is directed into the moldboard to eliminate spill-off. You can use the entire blade width to make the most of every pass. The expanded trailing wing also extends the clearing area of the plow beyond truck tires. This eliminates snow loss under your vehicle and effectively reduces windrow passes and cleanup.

Structural Support

• The heavy-duty blade construction features eight vertical ribs plus one rib on each wing for extra strength.
• Hydraulic wing extensions slide laterally across the structurally reinforced slide box. The tough construction of this channel provides excellent torsional blade strength and prevents distortion under heavy loads.
• Durable polyurethane wing-cutting edges reduce wear and protect the blade – allowing it to “trip” in any position.
• With the FISHER® Trip-Edge design, four trip springs protect you, your plow and your vehicle.